Installation Instructions
12
/
12
www.elecycles.com
Q/A
1
Why there is no assistance when riding
？
a) Make sure the motor and display are properly connected to
the controller.
b) Please confirm whether the display is open.
c) Please confirm whether the PAS level is 0. If yes, press "+"
to set PAS level to one of the 1-5 level and then check if it is
helpful.
d) Raise the rear wheel and long press the "-" button to see if
the rear wheel is electrically driven. If there is no electric
drive, it can be confirmed that the controller is faulty. Please
send the controller back.
e) Confirm whether the system is equipped with a 100G’s
sensor cap according to section 1.1, if not, please reinstall the
sensor cap.
f) Recalibrated the sensor and recheck if there have
assistance according to section 6.4.
2
Why there is electric power while reversing flywheel?
This is because the sensor is not properly calibrated, please
calibrate according to section 6.4.
