Electrovaya Scribbler SC300, Руководство пользователя

Страница: 52 / 61

6. Open Notepad (click Start , point to All Programs , then point to Accessories
and click Notepad ).
7. On the Input Panel press the Paste button with your stylus. This will paste
the highlighted text from the clipboard into Notepad .
8. Add a paragraph break and enter some notes describing what you were doing
when you received the message.
9. Save the file and refer to it when you contact the software manufacturer.
7.1.1 Power and the Battery
The Scribbler receives its power through an AC adapter and power cable or from the internal
battery. Power problems are interrelated. For instance, a faulty AC adapter or power cable
will neither power the computer nor recharge the batteries.
Problem: The AC power light does not come on when you plug in the AC adapter and
power cable.
Solution: Make sure the AC adapter and power cable are firmly plugged into the both the
wall outlet and the computer.
If the AC power light still does not come on, check to make sure the wall outlet is working by
plugging in another device into it.
7.2 Problems that may occur when you power on the Scribbler
Problem: The Scribbler will not start.
Solution:
Suggestion 1: Make sure you attached the AC adapter and power cable correctly.
Also be sure that the battery is not dead.
Suggestion 2: Press and hold down the power button for a few seconds.
Suggestion 3: If you are using the AC adapter, check that the wall outlet is working by
plugging in another device such as radio.
Problem: The Scribbler starts, but when you tap on options with the stylus or press a key,
nothing happens.
Solution:
Suggestion 1: It is possible that the Scribbler is in Standby mode. Simply turn off the
computer using one of the three options listed earlier.
Suggestion 2: Please refer to the resource conflict documentation of any external units that
are currently in use
52