Electrovaya Scribbler SC300, Руководство пользователя

Страница: 23 / 61

4.2 Turning on the power
To turn on the Scribbler:
1. Make sure all external devices (such as the AC adaptor, if you plan to use AC power
rather than battery power) are properly connected and ready.
2. If an optional external diskette drive is connected, check that the drive is empty.
3. In the upper right hand corner of the Scribbler is a power button. Press and hold your
stylus into the power hole until the
on/off light on the system indicator
panel glows green – about one second.
4. The preinstalled operating system will
load automatically
CAUTION: When you turn on the Scribbler for
the first time, don’t turn off the power again
until the operating system has loaded
completely.
CAUTION: Never turn off the computer while any of the drives are in use. Doing so may
damage the media in use and result in loss of data.
4.3 Turning off the power
Generally, it’s a good idea to turn off your Scribbler when you are not using it for a while.
If you are using the Scribbler for the first time , leave the computer plugged into a power
source (even though the Scribbler is off). This will allow the battery to charge. When the
battery light glows green, the battery is fully charged.
Guidelines
•
If you have work in progress use the Hibernate command to save your system
settings to the hard disk. Then, when you turn on the computer again, you will
23