Electrotherm Shenpaz Gemini LT, Руководство пользователя, Страница: 1 / 81

Gemini LT user manual version 1.3.18 2 | P a g e
Warning
ATTENTION!
You have available one of the most precise dental ceramic furnaces equipped with a heating
muffle made of quartz glass or ATC from the original manufacturer of this technology with an
experience of more than
30
years.
IN ORDER TO PRESERVE THIS PRECISION AT ALL TIMES, PLEASE BE SURE TO
ATTENTIVELY READ THE FOLLOWING INSTRUCTIONS PRIOR TO USING THE
FURNACE!
⚫
Prior to carrying out maintenance work on the furnace or in case of mechanical failure,
firstly be sure to completely shut down the device. To do so, switch the main switch
(POWER) on the back of the furnace to OFF and pull the power-supply plug.
⚫
Only qualified technicians and experts recommended by the furnace supplier should open
the furnace.
⚫
All pumps connected to the furnace and those which may have been supplied by the
manufacturer or by other suppliers must be marked with the CE symbol. In case of doubt,
consult your furnace supplier.
⚫
Be sure to only use ceramics and alloys that are specifically provided for use in dental
firing or pressing furnaces.
⚫
Certain parts of the furnace may run very hot during operation. Be sure to use the
complimentary supplied tweezers.
⚫
Do not attempt to open the furnaces without authorization since this will void the
guarantee. For any necessary repair and maintenance work, consult your Shenpaz device
servicing center.
⚫
In case of a necessary replacement of fuses, proceed as follows:
1) Pull the power-supply plug.
2) Replace the fuse.
3) Be sure the correct safety fuse parameter is indicated on the spare fuse.