User guide
ELI
O
S
ECH001XN111-A4 – 07/2022
114
Measurement on ECHOSOFT
6.2 ASSR
6.2.4
Measurement results
The
ASSR
measurement results come in two forms. First, the validation results for the different intensities for each
frequency and for each ear. Then, an extrapolation of these results is displayed in the form of an audiometry graph.
You can switch between these two displays by using
the tabs at the top of the window.
The buttons at the bottom left let you save the current
bar and create a new one, add a note and print.
6.2.4.1
Validation and input/output graph
For each frequency, the results are, on the one hand, displayed in the form of an input / output graph, comparing the
sound intensity tested (in dB) with the electric power (in nVolts) of the physiological response, and, on the other hand,
in the form of a validation graph of each intensity as a function of time.
Carrier frequency
Modulating frequency
range
Validation of the mea-
surement
Tested intensities
(here 60, 65, 50 and 40dB)
Value of the electrophysi-
ologique signal un nVolt
Ratio between
signal (in
green)
and
noise (in red)
Содержание ECHODIA ELIOS
Страница 100: ...User guide ELIOS ECH001XN111 A4 07 2022 99 Measurement on ECHOSOFT 6 1 Evoked potential modul ABR ECochG et VEMP...
Страница 118: ...User guide ELIOS ECH001XN111 A4 07 2022 117 Measurement on ECHOSOFT 6 3 Hydrops Shift OAE and DPMC...
Страница 137: ...User guide ELIOS ECH001XN111 A4 07 2022 136 Measurement on ECHOSOFT 6 6 Audiometry...
