User guide
BABYS
C
REEN
ECH001XN121-A4 – 07/2022
15
Chapter 2. General information about using BABYSCREEN
2.3 Advanced configurations
The “
Calibration
” menu allows the consultation of the
acoustic calibration values defined for your device.
2.3
Advanced configurations
2.3.1
Otoacoustic emission (OAE) configurations
There are different protocols for collecting and studying otoacoustic emissions. If you are accustomed to a specific
protocol, the
BABYS
C
REEN
device allows you to define your own configurations.
In the main menu of the device, click on “
Config
”. The
settings window opens. Click on “
Config OAE
” to ac-
cess the advanced otoacoustic emissions settings.
A password will be required to be able to change the
default settings. The password is the 8 digits of the de-
vice serial number. The serial number can be fund on
the label located on the back of the device or at the bot-
tom right of the home screen.
Don't modify this value, only
Electronique du Mazet
or your reseller are approved to realize this cali-
bration.
The
BABYS
C
REEN
device must be calibrated once every year to guarantee the quality of the measurements.
Please contact your retailer to plan this calibration.
Some of these options require a password to be changed. This is the serial number of your device, indi-
cated on the back of it on the S/N line. This number is also displayed at the bottom right of the home
page.
A bad setting can make the next measurements unusable and irrelevant.
If you have any doubts about the configuration set, click on "
Reset data
" to return to the parameters dis-
played at the factory configuration.
