Electron Machinedrum SPS-1, Руководство пользователя

Страница: 61 / 120

SONG MODE
53
2.
Move to the EDIT icon and press [ENTER/YES] to open the EDIT SONG screen.
This is where you arrange your patterns into a song. You can edit the song while it is
playing. The two filled arrows on each side of one of the steps are the song position
pointers. They indicate which song step the sequencer is currently playing. In the header
of the menu, next to the text “EDIT SONG” there is a counter, indicating how many bars
and beats the song has played.
3.
Use the [UP] and [DOWN] keys to select the song row you wish to edit. The [LEFT] and
[RIGHT] keys allow you to move the focus between the pattern, repeat, offset, length,
BPM and mute settings. The SOUND SELECTION wheel alters the value of each set-
ting.
4.
The pattern settings are located in the PAT column. The SOUND SELECTION wheel is
used for choosing between patterns and functions. You can also select a pattern by hold-
ing the
[BANK A-H] key and pressing a [TRIG] key.
5.
The END mark indicates the end of the song. When this point is reached, the sequencer
will stop. You can also program loops in this column. See section “SONG LOOP”, on
page 54 for more information on loops.
6.
The REP column controls how many times the current pattern will be repeated for that
particular row in the song.
7.
Each row in the song can have its own BPM setting. You set the tempo in the BPM col-
umn. If you do not specify a BPM value on a step, the sequencer will use the last one
used in the song. If a song does not have any tempo settings, the sequencer will use the
current tempo.
• To insert a step in the song, use [FUNCTION] together with the [DOWN] key.
• To remove a step in the song, use [FUNCTION] together with the [UP] key.
• Copy, paste, clear and undo functions operate on rows in song edit