Electron CD081E, Руководство по эксплуатации

Страница: 6 / 8

CONNECTION TO AN
EXTERNAL UNIT
I
MAINTENANCE
Use a commercially available connection cord
which has a 3.5mm stereo plug at one and two
phono plugs at the other end.
Connect the stereo plug to the LINE OUT jack
of the unit and connect the phono plugs to the
analog input (AUX) terminals of the external unit.
NOTE NOTE
Turn off the power of both units before connection.
DO NOT connect to the PHONES inputs of an
amplifier(with a built-in phonoe qualizer - amplifier)
Adjust the volume and X-BASS on this unit.
To clean the lens J
If the lens become dirty, the player will skip or not
play, If this occurs, clean the lens in the following.
manner, To remove dust or dust particles, first use
a camera lens blower/brush 1 to blow a few times
to loosen particles, then gently brush the lens 2
clean finish by blowing the lens again.
Note
Take care not to get too much solution on the swab.
which could flow into the unit and cause damage.
Pressing too strongly with the swab could scratch
or break the lens.
To clean the discs K
Before playing, wipe the disc from the center out
with a cleaning cloth, After playing, store the disc
in its case.
J
K
5
I
LINE IN
CD IN
AUX
R L