– 1 –
1 . 0
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
2
2.0 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
3
3.0
Contents of Complete Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
4
4.0
Installing/Replacing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
5
5.0
Measuring RPM – Non-Contact Mode . . . . . . . . . . . . . . . . . . . . . . .
0
6
6.0
Measuring RPM – Contact Mode . . . . . . . . . . . . . . . . . . . . . . . . . .
0
7
7.0 Measuring Surface Speed & Length . . . . . . . . . . . . . . . . . . . . . . . . .
0
8
8.0 Built-in Memory System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0
9
9.0
Range & Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 0
10.0
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
11 . 0
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 2
TABLE OF CONTENTS
– 12 –
11.0 WARRANTY
ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the
original purchaser that this product is of merchantable quality and confirms
in kind and quality with the descriptions and specifications thereof. Product
failure or malfunction arising out of any defect in workmanship or material
in the product existing at the time of delivery thereof which manifests
itself within one year from the sale of such product, shall be remedied by
repair or replacement of such product, at ELECTROMATIC’s option, except
where unauthorized repair, disassembly, tampering, abuse or misapplica-
tion has taken place, as determined by ELECTROMATIC. All returns for
warranty or non-warranty repairs and/or replacement must be authorized by
ELECTROMATIC, in advance, with all repacking and shipping expenses to
the address below to be borne by the purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR ANY PARTICULAR PURPOSE OR APPLICATION.
ELECTROMATIC SHALL NOT BE RESPONSIBLE NOR LIABLE FOR ANY
CONSEQUENTIAL DAMAGE, OF ANY KIND OR NATURE, RESULTING
FROM THE USE OF SUPPLIED EQUIPMENT, WHETHER SUCH DAMAGE
OCCURS OR IS DISCOVERED BEFORE, UPON OR AFTER REPLACEMENT
OR REPAIR, AND WHETHER OR NOT SUCH DAMAGE IS CAUSED BY
MANUFACTURER’S OR SUPPLIER’S NEGLIGENCE WITHIN ONE YEAR
FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation may not
apply to you. The duration of any implied warranty, including, without
limitation, fitness for any particular purpose and merchantability with
respect to this product, is limited to the duration of the foregoing warranty.
Some states do not allow limitations on how long an implied warranty
lasts but, not withstanding, this warranty, in the absence of such
limitations, shall extend for one year from the date of invoice.
ELECTROMATIC Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516—USA
Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., Inc.,
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages
resulting from the use of information contained herein. Any brand or product names mentioned here-
in are used for identification purposes only, and are trademarks or registered trademarks of their
respective holders.
OI109DT2
