Electrolux WTM165ERA Скачать руководство пользователя

Страница: 53 / 56

ENGLISH

I3.8

Door open

When one or more doors are open, the indicator “T”
(Table 5) flashes and the display shows

Close all open doors and restore normal dishwasher operation.

I3.9

Emergency stop

When the emergency stop push button is activated,
the dishwasher emits an acoustic signal, the indicator
“S” (Table 5) flashes and the display shows

Deactivate the emergency stop push button to restore
normal dishwasher operation, following that given in
par. E10.4 “Emergency stop reinstatement”.

I3.10

General alarm

When the dishwasher has a general anomaly it emits
an acoustic signal, the indicator “V” (Table 5) flashes
and the display shows

List of possible documented machine alarms:

Door is Open on

PREWASH

WASH

RINSE

EMERGENCY
SWITCH

ACTIVATED

ALARM

CODE xx

CALL

SERVICE

Rinse zone alarms

Code

Description

The Air Gap was not completely filled
within the max. filling time.

The pressure sensor on the Air Gap
electronic board does not work correctly.

The Duo-Rinse tank was not completely
filled within the max. filling time.

The pressure sensor on the rinse module
electronic board does not work correctly.

The required temperature was not
reached in the boiler within the max.
heating time.

The water temperature in the boiler is too
high.

The boiler temperature sensor is short-
circuited.

The boiler temperature sensor is open.

The required temperature was not
reached in the Duo-Rinse tank within the
max. heating time.

The water temperature in the Duo-Rinse
tank is too high.

The Duo-Rinse tank temperature sensor
is short-circuited.

The Duo-Rinse tank temperature sensor
is open.

The rinse pump thermal protector has
tripped.

The Duo-Rinse pump thermal protector
has tripped.

The Duo-Rinse tank was not completely
emptied within the max. emptying time.

The inverter that controls the feeding
gearmotor has generated an error.

The Air Gap was not completely emptied
within the max. emptying time provided
for.

The rinse module PCB is not correctly
connected to the inverter (wire short-cir-
cuited to earth).

The rinse module PCB is not correctly
connected to the inverter (wire not con-
nected).

Wash zone alarms

Code

Description

The wash tank was not completely filled
within the max. filling time.

The pressure sensor on the wash mod-
ule electronic board does not work cor-
rectly.

The required temperature in the wash
tank was not reached within the max.
heating time.

The water temperature in the wash tank
is too high.

The wash tank temperature sensor is
short-circuited.

The wash tank temperature sensor is
open.

The upper wash pump thermal protector
has tripped.

The lower wash pump thermal protector
has tripped.

Содержание WTM165ERA

























































Результаты поиска

Содержание WTM165ERA

Отзывы:

Похожие инструкции для WTM165ERA

Бренды по названию

Популярные бренды

Electrolux WTM165ERA, Руководство пользователя

Результаты поиска

Содержание WTM165ERA

Отзывы:

Похожие инструкции для WTM165ERA

Бренды по названию

Популярные бренды