Electrolux TRILOBITE, Обзорное руководство

Страница: 6 / 22

4 English
Connection
terminals Display
Trilobite
Trilobite navigates using ultrasound and uses infrared light to detect
level differences. During edge cleaning, it receives information about
the size of the room. Edge cleaning serves as the basis for the estimated
duration for independent vacuuming in the Normal vacuuming mode.
NOTE! Trilobite is not fully charged upon delivery. Before using it
the first time, connect it to the battery charger. (Refer to page 8.) A full
battery charge requires approximately two hours.
Battery charger
When Trilobite has completed Normal or Quick vacuuming and it has
indicated the charger (flash in display. Refer to page 10), it returns to
the charger.The batteries are then charged and it is ready for more
work.
Magnetic strip
The magnetic strip serve as “virtual walls” and are important for correct
operation. Use it to block e.g. door and wall openings and level diffe-
rences lower than 10 centimetres. (Refer to page 9.)
Use a pair of scissors or a knife to trim the magnetic strip to the
correct length. See page 9 in the user instructions to see how the
magnetic strip should be fitted.
Display and function keys
The function keys are used to start/stop Trilobite and for performing
any necessary setup and programming.The display clearly shows which
function is selected.
Handle
The handle, with its ergonomic grip, is used to lift and carry Trilobite
easily.
Roller
The motor-driven rotating roller contributes to excellent dust pickup.
Dust collector
The dust collector, with its efficient microfilter, has a high capacity and
is very simple to lift out for emptying. (See also page 5.)
Product description
Self-adhesive magnet strip
for permanent installation
Battery charger
Terminals for
connection to
charger
Handle
Flexible bumper
Roller
Roller cover
lock button Rating plate
Drive wheel
Filter lid
lock button
Dust
collector