Electrolux TRILOBITE, Обзорное руководство

Страница: 13 / 22

English 11
Vacuuming Programs
Normal. Timer: Auto
Select program?
Quick. Timer: 10min
Select program?
Spot
Select program?
Normal vacuuming
When you start Trilobite it is ready
to start vacuuming using the Normal
program and automatic time calculation.
1. When Trilobite is switched off or placed
in the charger, press to start.
2. Press to start vacuuming.
Changing the time setting
This may be necessary when vacuuming floor
surfaces of 40 m
2 .
1. Press twice until “Select timer?”
is shown, confirm by pressing .
2. Set the desired time setting by pressing
and then confirm with .
(When “On” is chosen, use to set
desired time, confirm by pressing .
This is the vacuuming time after wall
mapping.)
3. Press to commence vacuuming.
Never start vacuuming at distances
under 0.5 m from a magnetic strip, staircase
or level difference. Vacuuming can always be
interrupted by pressing
. After this,
pressing recommences vacuuming, while
pressing will call up the menu.
Quick vacuuming
The Quick program is identical with Normal
vacuuming except that edge cleaning is not
included.Vacuuming takes shorter time with
the duration preset to 10 minutes, however,
the vacuum result may be slightly inferior.
1. After you have switched on Trilobite,
press until “Select program?” is shown.
Confirm by pressing .
2. Use until “Quick” is displayed and
confirm by pressing .
3. If you don’t want to change the time
setting, press twice and start
vacuuming by pressing . If you would
like to change the time setting, please
follow the next steps instead of step 3.
4. Confirm the option “Select timer?”
by pressing .
5. Set the desired time setting by pressing
and then confirm with .
(When “On” is chosen, use to set
desired time, confirm by pressing .)
6. Press to commence vacuuming.
Never start vacuuming at distances
under 0.5 m from a magnetic strip, staircase
or level difference. Vacuuming can always be
interrupted by pressing
. After this,
pressing recommences vacuuming, while
pressing will call up the menu.
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, like if you have spilled some-
thing.The area that is vacuumed is approx.
1 m
2 with Trilobite placed in the centre of
the area.The area is vacuumed twice.
1. After you have switched on Trilobite,
press until “Select program?” is shown.
Confirm by pressing .
2. Use until “Spot” is displayed and
confirm by pressing .
3. Put Trilobite in the centre of the area to
be vacuumed and start vacuuming by
pressing .
Do not under any circumstances
vacuum liquids or lit or glowing objects,
e.g. cigarette butts.
Never start vacuuming at distances
under 0.5 m from a magnetic strip, staircase
or level difference. Vacuuming can always be
interrupted by pressing
. After this,
pressing recommences vacuuming, while
pressing will call up the menu.