Problem
Possible cause
Solution
The appliance does
not cool at all
Plug is not connected to
the mains socket properly
Connect the mains plug
properly
There is no voltage in the
mains socket (try to con-
nect another appliance in-
to it)
Call an electrician
The appliance is not
switched on
Switch on the appliance
Temperature Regulator is
not on
Check the Temperature
Regulator
Green indicator
flashing
Temperature sensor prob-
lem
Call the service personnel
8.1
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective
door gaskets. Contact the Service
Center.
9.
INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
9.1
Positioning
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar) al-
so, but for optimum performance install
this appliance at a location where the am-
bient temperature corresponds to the cli-
mate class indicated on the rating plate of
the appliance:
Cli-
mate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
9.2
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
ENGLISH
57
Содержание TG1000N
Страница 62: ...62 www electrolux com ...
Страница 63: ...ENGLISH 63 ...
Страница 64: ...www electrolux com shop 200384558 A 242012 ...