Electrolux TE1220E, Руководство по установке

Страница: 26 / 40

26
Installation manual
8 Gas connection
8.1 Fasten the label
Before installing the machine fasten the label the “user instructions” on the inside of the door in a suitable place and
at the front panel.
The label must have the correct country code, choose the correct label from the gas kit.
Read the technical instructions before installing the appliance. Read the user instructions before lighting the appliance.
This appliance may only be installed in a room if the room meets the appropriate ventilation requirements specified
in the national installation regulations. This appliance shall be installed in accordance with the rules in force, and
used only in a sufficiently ventilated space. Consult instructions before installation and use of this appliance.
Part Number: 0180500***-EN
GB, IE
User Instructions
Gas Dryer Made in China
MODEL: TE1220G
Pro.No. 9886900
52 00
Electrolu
x Professional S. p.A.
Viale Treviso, 15 - 33170 Pordeno ne
PIN. NO.: 1336DL0 05
Capacity: 12kg
Ser.No. 90310001 30
1336/20
AT, CH, CY, CZ, D K, EE, ES, FI, FR
, GB, GR, HR, IE , I T, LU, LV, LT,
NO, PT, RO, SE, SK, SI, TR: I2H (2
0) HU: I2H (25)
Gas Type: G20 Injector: Ø2.26mm
Nominal Heat Inpu t: 5.7kW(Hi)
For safety reas
ons use only g enuine spare p
arts
fig.W01623
8.2 General
May only be carried out by qualified personnel.
Mount a shut-off valve upstream from the machine.
The factory injector pressure setting corresponds to the fuel value given on the data label.
Check that the injector pressure and fuel value correspond with the values in the gas tables on the following pages. If
not, contact the supplier.
Note!
After connection all joints must be checked. There must not be any leaks.