Electrolux ICON E36IC75FSS, Руководство по обслуживанию

Страница: 19 / 37

Page 19
OPERATING THE COOKING ZONES (CONT’D)
To Turn ON one or more of the Cooking Zones (cont’d)
NOTE: Touch once, or repeatedly touch the or key pads to adjust or scroll
through power levels at any time during the cooking process (To scroll through the
power levels quickly touch and hold the or key pads until the power level desired
is reached). Once the Cooking Zone power level has been set the food will begin to heat
at that level until the power level is manually changed. For more information about the
available Cooktop Zones power levels available see “Power Level Settings” section on
page 10.
IMPORTANT OPERATING NOTES:
•
Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to
display error code and turn OFF while cooking. Clean the spills or remove the objects from
the cooktop.
• Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop
internal sensor may shut OFF of the cooktop to avoid over heating the appliance.
•
If the cookware or pan is moved from the center of any active Cooking Zone for any
reason, a sensor will detect the situation and the cookware will no longer heat. The
affected Cooking Zone LED will flash between
FFFFF
and the last power level set for the
Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes
before the Cooking Zone will automatically shut OFF.
To Turn OFF the Cooking Zones:
1. Once cooking is complete, touch the
On/Off
key pad to turn the Cooking Zone OFF.
2. The corresponding Cooking Zone ON/OFF Indicator light located above the
On/Off
key pad
will turn OFF. A beep will sound and the chosen Cooking Zone power level LED will
display
00000
. If no other key pads are touched the Cooking Zone will shut OFF
automatically in 10 seconds. If no other Cooking Zones are active and no other key
pads are touched the entire cooktop will shut OFF automatically in 20 more seconds.
3. When any Cooking Zone is OFF, the corresponding Cooking Zone LED may display
HHHHH
if the Cooking Zone temperature is too HOT. The LED will continue to display
HHHHH
, and
even if the Cooktop is switched OFF the LED will continue to display
HHHHH
as long as the
cooktop remains HOT.
CA CA CA CA CAUTION UTION UTION UTION UTION
The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface
may be HOT form residual heat transfered from the cookware and burns may occur.
BASIC OPERATION