Electrolux 800 thermaline h = 700 mm
Gas top on electric oven
The Electrolux 800-Thermaline of cooking equipment is designed for heavy duty use where space is at a
premium. The series consist of a wide choice of modular elements that can be installed as individual,
free-standing units or assembled into a complete cooking suite made virtually seamless by means of
cleverly-designed connecting rails. The models detailed on this sheet combine a gas burner top mounted
above an electric oven, with models available for operation from one side only or from both sides to suit a
central cooking island. Installation options are floor mounted on 100 or 200 mm high feet or a plinth which can
be either steel or masonry construction.
581596 with accessories
EASY TO USE
• Three burner sizes to suit
different cooking requirements
from rapid boiling to a gentle
simmer.
• Manual gas valves with fixed
high and low positions allow a
precise control of the flame
intensity.
• Large sized pan rests (330x330
mm) in enamelled cast iron with
long centre fins to allow the use of
the largest down to the smallest
pans.
• Pan rests and work top at the
same level allow moving pans
from one appliance to another
without lifting.
• Convenient operation with highly
visible control panels and knobs.
• Electric roasting and baking
oven for two GN2/1 shelves or
containers. Individual thermostatic
control to upper and lower heating
elements.
• Oven temperature up to 350°C.
• Thick steel base plate for the
even temperature distribution and
storage.
• Optional base plate with a fire
clay element provides a very
uniform distribution and long term
storage of the oven heat; it is
beneficial for sensitive patisserie.
• The upper heat of the oven can
also be used for grilling.
• A vent can be opened to allow
vapour to escape from the oven
when cooking food with a high
water content.
• All appliances conform to ruling
European safety and hygiene
standards and are
H
marked.
• Type-approved by an
international standards authority
and certified.
EASY TO MAINTAIN
• Flat spillage trays in AISI 304
stainless steel with cleaning
openings on front and rear side
with removable pan rests, burner,
rings and flame ignition parts.
• Body and support are made of
AISI 304 stainless steel.
• No gaps or dirt traps between
adjoining appliances when
connecting rails are fitted.
• All major components may be
easily accessed from the front.
