Electrolux FA31-200WT, Инструкция

Страница: 6 / 14

www.electrolux.com 6
Power off
Power down the product by gently touching the
ON/OFF icon on the center of the product (ref.
picture 9)
Air speed control
Change the fan speed by gently touching fan icon
on the product. Low speed as default setting and
if select Max fan speed, it will reach the Max fan
speed within 20s. (ref. picture 7).
Sleep mode
Chose the SLEEP mode by gently touching " "
icon on the product. In SLEEP mode unit will
operate at the low noise level and all indicators
except for SLEEP icon will go off. (ref. picture 8).
9
7
8
FILTER CHANGE INDICATOR
The filter change indicator will light up to
remind you to change the filter.
• When filter change indicator flicker with red
light, please replace the filter and reset the filter
change indicator.
• When filter change indicator stop flicker and the
red light fix, please replace the filter immediately
and reset the filter change indicator.
10
11 Filter change indicator reset operation
Press the ON/OFF button " " for 5s and filter
change indicator will reset, then red light will go
off.
STORAGE
ERROR CODE
If you are not planning to use the appliance for
a long time, cover it with plastic or return it to its
carton.
Fan failure error code, when fan failure occurs, the
light of screen will all go off and the unit can’t be
operated then.
15
16
NOTE: The multi-layer filter can not be washed, it
can only be replaced.
CAUTION!
Do not touch the fan blade when removing the
multi-layer filter.
CARE AND CLEANING
Unplug the appliance before cleaning to prevent
shock or fire hazards. Use a damp cloth or a
vacuum cleaner with soft brush to clean your air
purifier.
The plastic part of the cabinet and top may be
cleaned with an oil-free cloth or washed with a
cloth dampened in a solution of warm water and
mild liquid dishwashing detergent. Be sure to
wring excess water from the cloth before wiping
around the controls. Excess water in or around the
controls may cause damage to the appliance.
Never use harsh cleaners, wax or polish when
cleaning the unit.
12
14
13
Caution: Please ensure the filters are correctly
inserted in the filter compartment, the equipment
is installed on a level surface and the power plug
is firmly connected.
OPERATION
Connect the power plug.
Power on
Power on the product by gently touching the ON/
OFF icon on the center of the product (ref. picture 6).
5
6