Electrolux EWW1122DW, Руководство пользователя

Страница: 34 / 44

34 www.electrolux.com
10. HoW to CLeAn tHe FILteR
10.1
Cleaning your washer
Clean the filter when water leaks from the water inlet.
1. Pull the power plug out before cleaning it.
2. Turn off the water supply to
the washer and separate the
inlet hose.
3. Pull the inlet filter out.
1. Open the lower cover (1) by
using a coin. Remove the cap
hose (2) to pull out the hose.
2. Unplug the cap hose (2) ,
allowing the water to flow out.
At this time use a vessel to
prevent water flowing on to the
floor. When water does not flow
any more, turn the pump filter
(3) open to the left.
3. Remove any foreign material
from the pump filter (3) . After
cleaning, turn the pump filter
clockwise and insert the cap
hose (2) to the original place.
Close the lower cover.
4. Remove the dirt from the inlet
filter with a brush.
10.2
Cleaning your washer
• This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons
etc.
• If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could
be caused.
CAUTION!
Be careful when draining if the water is hot.
2 3 4
1 2 3 2 3