Electrolux EWG 147540 W, Руководство пользователя

Страница: 27 / 36

2. Onto a sink outlet spigot.
If the outlet spigot has not been used be-
fore, remove any blanking plug that may be
in place.
Push the drain hose onto the spigot and
secure with a clip, ensure a loop is formed
in the drain hose (see diagram) to prevent
waste from the sink entering the appliance.
If you intend to drain the hose from the ma-
chine into a sink, make sure that the sink is
empty and the plug hole is not blocked.
Use the plastic “U - Piece” supplied.
Loop
Important! Before connecting up the
machine to new pipework or to pipework
that has not been used for some time, run
off a reasonable amount of water to flush
out any debris that may have collected in
the pipes.
IN THE INTEREST OF THE
ENVIRONMENT
The appliance should be connected to the
FOUL drainage system, the water will then
be taken to a sewage works for treatment
before being discharged safely into a river.
It is essential that these appliances are not
connected to the surface water drainage
system as this water is discharged directly
into a river or stream and may cause pollu-
tion.
If you require any further advice please con-
tact your local water authority.
electrolux 27