background image

14

SOMETHING NOT WORKING ?

If the machine does not start up :

check that the lid is firmly shut;

check that the appliance is plugged in;

check that the mains fuse is intact;

check that the programme selector dial is correctly

positioned.

If the machine does not fill :

is the tap on ?

is water coming out of the tap? Check.

is the inlet hose squashed or bent?

  is the filter of the inlet hose clogged?

If the machine empties as it fills:

the end of the drain hose is too low.

If the machine does not drain and/or does not spin:

is the drain hose squashed or bent?

is the drain filter clogged?

If there is water on the floor:

too much detergent or unsuitable detergent? The

formation of foam can cause water leaks.

is one of the joints or the tap leaking? It is not always

easy to see as the leak often runs along the hose.

If the machine vibrates or is too noisy:

have all the transit bolts and packing been removed?

is the machine touching something?

are all the feet resting firmly on the ground? Have the

lock nuts been secured?

If you are unable to identify or solve the problem,
consult our servicing department. Before telephoning,
make a note of the make, model and date of purchase of
your machine: the Service Department will require this
information.

You will find these informa-
tions on the data plate of
the appliance. It is placed
on the filter door or at the
back of the appliance.

1

2

9

 5

5

8

8

 0

2

Содержание EW 865T















Отзывы: