Electrolux ESL 68070, Руководство пользователя

Страница: 29 / 48

Problem Possible cause Possible solution
The filters are dirty or not as-
sembled and installed correctly. Make sure that the filters are
clean and correctly assembled
and installed.
The quantity of detergent was
not sufficient or missing. Make sure that the quantity of
detergent is sufficient.
Limescale particles on the
dishes. The salt container is empty. Fill the salt container with dish-
washer salt.
Incorrect level of the water soft-
ener adjustment. Adjust the water softener with
the correct level.
The salt container cap is not
closed correctly. Make sure that the salt contain-
er cap is closed correctly.
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes. The rinse aid quantity is too
high. Decrease the rinse aid quantity.
Dry water drop stains on
glasses and dishes. The rinse aid quantity is too
low. Increase the rinse aid quantity.
The detergent can be the
cause. Use a different brand of deter-
gent.
The dishes are wet. The washing programme was
without a drying phase or with
a decreased drying phase. For better drying results, keep
the door ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is emp-
ty. Fill the rinse aid dispenser with
rinse aid.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser). Activate the rinse aid dispenser.
Activating the rinse aid dispenser
1. Open the menu option.
2. Go to SETTINGS .
3. Press the
OK /Start button to open the
submenu.
4. Go to RINSE AID and activate the rinse
aid dispenser.
5. Press the OK /Start button.
6. Press the Option button to close the
menu option.
TECHNICAL DATA
Dimensions Width
Height
Depth 596 mm
818 - 898 mm
550 mm
Electrical connection Voltage
Overall power
Fuse
Frequency 220 V
2000 W
9 A
60 Hz
Water supply pressure min.
max. 0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply
1) Cold water or hot water max. 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with 3/4" thread.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
electrolux 29