Electrolux ESF8570ROX Скачать руководство пользователя страница 15

Starting a programme

1. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

2. Close the appliance door.

3. Press Program again and again until

the indicator of the programme you

want to select comes on.

• If you want to select the

MyFavourite programme, press

and hold Program until the

MyFavourite setting comes on.

The display shows the programme

duration.

4. Set the applicable options.

5. Press Start to start the programme.

• The washing phase indicator

comes on .

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay repeatedly until the

display shows the desired delay time

(from 1 to 24 hours).

3. Press Start to begin the countdown.

• The indicator   is on.

• The remaining time counts down

in hours. The final hour is

displayed in minutes.

When the countdown is completed, the

programme starts and the indicator of the
running phase is on. The indicator   is

off.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you

have to set the programme and options

again.
Press and hold simultaneously Program

and Option until the appliance is in

programme selection mode.

Cancelling the programme

Press and hold simultaneously Program

and Option until the appliance is in

program selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new program.

End of the programme

When the programme is completed the

display shows 0:00. The phase indicators

are off.
All buttons are inactive except for the

on/off button.
1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2. Close the water tap.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to help you protect the environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, select a programme

with a prewash phase.

ENGLISH

15

Содержание ESF8570ROX

























Отзывы: