18
For example, to adjust the parameter
dIn
, proceed as follows:
1. access the programming mode;
2. select the parameter
dIn
;
3. modify the parameter value and press the button “L“ to
store the set value;
4. to exit the programming mode, press the “Wash cycle 3“
button.
I
GENERAL SAFETY RULES
I.1
Introduction
The machines are provided with electric and/or mechanical
safety devices for protecting workers and the machine itself.
Therefore the user must not remove or tamper with such
devices.
The Manufacturer declines any liability for damage due to
tampering or their non-use.
I.2
Guards
The guards on the machine are:
• fixed guards (e.g. casings, covers, side panels, etc.), fixed
to the machine and/or frame with screws or quick-release
connectors that can only be removed or opened with tools;
• interlocked movable guards (door) for access inside the
machine;
• machine electrical equipment access doors, made from
hinged panels openable with tools. The door must not be
opened when the machine is connected to the power supply.
WARNING
Several
illustrations
in
the
manual show the machine, or
parts of it, without guards or with
guards removed. This is purely
for explanatory purposes. Do not
use the machine without the
guards or with the protection
devices deactivated.
I.3
Safety signs to be placed on the
machine or near its area
Prohibition
Meaning
do not oil, lubricate, repair and adjust
moving parts
do not remove the safety devices
do not use water to extinguish fires
(placed on electrical parts)
Danger
Meaning
danger of crushing hands
caution hot surface
danger of electrocution (shown on elec-
trical parts with indication of voltage)
WARNING
Do not remove, tamper with or
make illegible the safety, danger
and instruction signs and labels
on the machine.
-
+
