Electrolux EPN09C38HW, Руководство пользователя

Страница: 17 / 112

17 ENGLISH
10. OPERATING TEMPERATURE
11. EMERGENCY OPERATION
Pi
Use this operation only when the
remote controller is defective or lost,
and with function of emergency running,
air conditoner can run automatically for
a while.
1. Open and lift the front panel up to an
angle and fixed the position.
2. When the emergency operation
switch is pressed, the “ Pi “sound is
heard once, which means the start of
this operation.
3. When power switch is turning on
for the first time and emergency
operation starts, the unit will run
automatically in the cool mode when
room temperature above 23°C
and run in heat mode when room
temperature below 23°C.
4. Close the panel firmly to its original
position.
• It is impossible to change the
settings of temp. and fan speed,
It is also not possible to operate
in time or dry mode.
• To restore the remote controller
operation, use the remote
controller directly.
Manual control button
Manual control button
Operating temperature ranges
Model climate Type Ambient temperature (Cool) Ambient temperature (Heat)
T1 18°C~43°C -7°C~24°C
Important!
1. Optimum performance will be
achieved within these operating
temperatures. If air conditioner is
used outside of the above conditions,
certain safety protection features
might come into operation and cause
the unit to function abnormally.
2. If the air conditioner runs for a long
time in cooling mode and the humidity
is high, condensed water may drip out
of the unit. Please sets the vertical
air flow louver to its maximum angle
(vertically to the floor), and set HIGH
fan mode.