Operation instruction
Connecting gas cylinder
The propane gas supply cylinder to be
used must be constructed and
marked in accordance with the
Specifications for propane gas
cylinders of your local authorities.
Only cylinders with a listed overfill
prevention device (OPD) and marked
"propane" may be used. Cylinders
with an OPD will have valve handles
with three "lobes" (prongs). Use only
20-pound cylinders (Height 18.11”,
Diameter Tank 9.84”, Diameter foot:
8.03”) equipped with a cylinder
connection device compatible with
the connection for outdoor cooking
appliances. The cylinder must include
a collar to protect the cylinder valve.
The gas cylinder should not be
dropped or handled roughly! If the
appliance is not in use, the gas
cylinder must be disconnected.
Storage of an appliance indoors is
permissible ONLY if the cylinder is
disconnected and removed from the
appliance. Cylinders must be stored
outdoors out of the reach of children
and must not be stored in a building,
garage or any other enclosed area.
Your cylinder must never be stored
where temperatures can reach over
125°F. Before connection, be sure that
there is no debris caught in the head
of the gas cylinder, head of the
regulator valve or in the head of the
burner and burner ports.
Connect regulator valve and hand-
tighten firmly. Disconnect the propane
Only use the regulator provided!
If a replacement is necessary, please
call our customer service center. Do
not use replacement parts that are not
intended for this grill.
The cylinder valve always has to be
above the horizontal position, for the
cylinder to have vapor withdrawal only.
operation instruction
54
electrolux
53 electrolux
operation instruction
cylinder from the regulator valve when
the grill is not in use. DO NOT obstruct
the flow of combustion air and
ventilation air to the grill. The propane
cylinder must be arranged for vapor
withdrawal and equipped with a listed
overfilling prevention device. Please
put the proper cylinder orientation to
provide vapor withdrawal.
Connection the Gas Cylinder
Always place the propane cylinder on
the tank brackets located on the right
side of the cart. Always confirm that
all burner control knobs are in the OFF
position before activating the gas
supply.
Before connection, be sure that there
is no debris caught in the head of the
gas cylinder, head of the regulator
valve, or in the head of the burner and
burner ports. Always connect the gas
supply regulator as follows: Insert the
nipple of the valve coupling into the
tank valve and tighten the connection
collar by turning it clockwise wit one
hand while holding the regulator with
the other hand (See diagram to right).
Disconnect the propane cylinder from
the regulator valve when the grill is not
in use.
Do not obstruct the flow of
combustion air and ventilation air to
the grill.
Keep ventilation openings of the
cylinder enclosure free and clear from
debris.
Place dust cap on cylinder valve outlet
Do not store a spare LP-gas cylinder
under or near this appliance.
Never fill the cylinder beyond 80
percent full.
If the information in (a) & (b) is not
followed exactly, a fire causing death
or serious injury may occur.
E
N
G
E
N
G
