Electrolux EFD18000U, Руководство пользователя

Страница: 13 / 32

what to do if … electrolux 13
What to do if
…
Problem Possible cause Remedy
The appliance cannot be
switched on or is not operating More than 10 seconds have
passed since the appliance
was switched on Switch appliance on again
Several sensor fields were
touched at the same time Only touch one sensor field
The sensor fields are partly
covered by a damp cloth or
with liquid Remove the cloth or the liquid.
Switch appliance on again
Electronics fault Disconnect appliance from the
electrical supply for a few min-
utes. (Take the fuse out of the
house’s wiring system.)
If the appliance still does not
operate after switching on
again, call the Customer Care
Department
Fuses keep blowing Too many electrical appliances
are connected Switch off electrical appliances
The fan is switched off, but the
down draught extractor is
raised There was a power cut during
operation Switch on down draught ex-
tractor and touch
e
is displayed Filter sensor has responded. Clean filter and reset filter sen-
sor (see section “Cleaning and
Care”)
Down draught extractor has
switched off automatically and
cannot be switched on again Vertical adjustment of the
down draught extractor has
become jammed Disconnect appliance from the
electrical supply for a few min-
utes. (Take the fuse out of the
house’s wiring system.)
If the appliance still does not
operate after switching on
again, call the Customer Care
Department