Electrolux EBSL4XCN, Руководство пользователя, Страница: 22 / 28

Problem Possible cause Remedy
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo" .
The demo mode is activa-
ted.
Refer to "Basic Settings" in
"Daily use" chapter.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the oven cavity. Do not
remove the rating plate from the oven
cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to Safety chapters.
13.1 Building in
During installation in
combustible matter, NIN SEV
1000 and fire protection
guidelines and regulations of
the Association of Cantonal
Fire Insurance shall be strictly
adhered to.
1. Pull the appliance drawer out as far as
it goes and remove it.
2. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
3. Push the appliance into the recess.
A = appliance, N = recess
A
A
A A
D
A
435
mm
60
mm
170
mm
105
mm
A
757 mm
N 762
mm
A 567
mm
N 605
mm
A 548 mm
N 550 mm
5 / 6 =
635 mm
6 / 6 =
762 mm
~50 mm
www.electrolux.com 22