Electrolux EBSL4XCN, Руководство пользователя, Страница: 15 / 28

8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Turn on the oven.
2. Select the menu: Assisted Cooking.
Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight Automatic.
Press
to confirm.
5. Press or to set the food
weight. Press to confirm.
The automatic programme starts.
6. You can change the weight at any
time. Press
or to change the
weight.
7. When the time ends, a signal sounds.
Press any symbol to turns off the
signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and the
plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
The oven calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
heating function and
temperature.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2.
Insert the tip of the core temperature
sensor into the centre of meat or fish,
in the thickest part if possible. Make
sure that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
ENGLISH 15