4.6
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone:
touch ( comes on).
Immediately touch the correct heat
setting. After 3 seconds comes on.
To deactivate the function:
change the
heat setting.
4.7
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone:
touch . comes on.
To deactivate the function:
change the
heat setting.
4.8
Power function of the double
ring cooking zone
The function is activated for the inner ring
when the hob senses the cookware with a
smaller diameter than the inner ring. The
function is activated for the outer ring
when the hob senses the cookware with a
bigger diameter than the inner ring.
4.9
Timer
Count Down Timer
You can use this function to set how long
the cooking zone operates for only this
one time.
First set the cooking zone then set the
function.
You can set the heat setting
before or after you set the function.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function:
touch of
the timer to set the time (
00 - 99
minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
To see the remaining time:
set the
cooking zone with . The indicator of the
cooking zone starts to flash quickly. The
display shows the remaining time.
To change the time:
set the cooking
zone with . Touch or .
To deactivate the function:
set the
cooking zone with and touch . The
remaining time counts back to
00
. The
indicator of the cooking zone goes out. To
deactivate the function you can also touch
and at the same time.
When the time comes to an
end, the sound operates and
00
flashes. The cooking zone
deactivates.
To stop the sound:
touch .
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function:
touch of
the timer. comes on. When the
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between and counted
time (minutes).
To see how long the cooking zone
operates:
set the cooking zone with .
The indicator of the cooking zone starts to
flash quickly. The display shows how long
the zone operates.
ENGLISH
9
