E1
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS
NOTE
1. Base must be capable of supporting 150 pounds (68.0 kg) for
the Microwave Wall Oven only.
2. Make sure base is level and front of cabinet is square. If the
cabinet base is not level, the oven will tend to slide out when
opening the door.
3. Minimum required distance is 36" (91.44 cm) from the floor.
4. The outlet should not be located in the shaded area of Figure
1. It is required the outlet be a dedicated 120 volts with a
15amp rating for the appliance.
5. Minimum required distance between the Microwave Oven
and the wall oven cutouts should be at least 3 inches. The
actual visible space will be reduced due to the overlap of the
Microwave Oven lower vent and the wall oven.
CL
B
A
D
C
F
I
H
G
to top of
cp angle
(59.8 cm)
23 ½"
20 ¾"
(52.7 cm)
6"
4"
18"
PRODUCT DIMENSIONS
MODEL
A
B
C
D
EW27SO60LS
27" (68.8)
22
1
/
4
" (56.5)
24
7
/
8
"
(63.2)
21
11
/
16
" (55.1)
EW30SO60LS
30" (76.4)
22
1
/
4
" (56.5)
28" (71.1)
21
11
/
16
" (55.1)
E3OM075HSS / E3OM075HPS
30" (76.4)
22" (55.9)
28" (71.1)
21
11
/
16
" (55.1)
CUTOUT DIMENSIONS AND CABINET WIDTH
MODEL
Min. F Max.
G
Min. H Max.
I
EW27SO60LS
25
1
/
8
" (63.8)
25
5
/
8
" (65.1)
24" (61.0) min.
21"(53)
21
1
/
2
"(54.6)
27" (68.8) min.
EW30SO60LS /
E3OM075HSS / E3OM075HPS
28
1
/
2
"(72.4)
29" (73.7)
24" (61.0) min.
21"(53)
21
1
/
2
"(54.6)
30
1
/
8
" (76.5) min.
All dimensions are in inches (cm).
Installation and service must be performed by a qualified installer.
IMPORTANT: Save for local electrical inspector's use.
Read and Save these instructions for future reference.
The electrical requirements for this oven are 120 volts, 15 amps.
Figure 1
TINSLB032MRR0
316902485
