Electrolux 943005440, Руководство пользователя

Страница: 11 / 36

Refer to "Care and cleaning" chapter.
Clean the oven and the accessories
before the first use.
Put the accessories back to their initial
position.
5.2 Setting the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
5.3 Changing the time
You cannot change the time
of day if any of the functions
operates.
Press again and again until the
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
5.4 Preheating
Preheat the empty oven before first use.
1. Set the function . Set the
maximum temperature.
2. Let the oven operate for 1 hour.
3. Set the function . Set the
maximum temperature. The
maximum temperature for this
function is 210 °C.
4. Let the oven operate for 15 minutes.
5. Set the function . Set the
maximum temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Control panel layout
1 2 3 5 4
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sensor
field
Function Comment
1
ON / OFF To activate and deactivate the hob.
2
STOP+GO
Child Safety Device
To activate and deactivate the function.
To lock / unlock the control panel.
3
- To select the cooking zone.
ENGLISH 11