Electrolux 400 SERIES Скачать руководство пользователя

Страница: 36 / 52

Adding other wash products

• Color-safe bleach, water conditioner,

detergent booster and enzyme

products may be added with detergent.

• Put liquid products in the

Main Wash

- liquid detergent

compartment or

powder products in the

Main Wash -

powder

detergent

compartment.

Stain treatment (on select models)

• For heavily soiled or stained loads, select

the Stain option (on select models only

- StainTreat, StainTreatII, or StainSoak)

and add the recommended amount of

detergent or stain treatment to stain soak/

treat compartment (on select models).

• See

Cycle Options for information about

Stain options for your model.

• See

Stain Removal Guide in this

instruction for additional suggestions.

Detergent pack

For 300 series models

Add detergent pack directly to the empty

drum

BEFORE

placing laundry into the unit.

• DO NOT

place detergent packs

directly into the detergent drawer. The

gel coating may cause the detergent

drawer to become clogged.

For 400, 500 and 600 series models

Add the recommended quantity of high

efficiency detergent packs to the detergent

pack compartment in the dispenser.

• DO NOT place more than two packs

into the dispenser.

• When using the

fast wash

cycle, only

one detergent pack should be used.

Liquid chlorine bleach

• If desired, add liquid chlorine bleach to

the compartment labeled

Liquid Bleach

and marked with this symbol: .

• DO NOT fill above the

MAX

fill line.

• Add color-safe bleach with detergent.

Liquid fabric softener

• If desired, pour the recommended

amount of liquid fabric softener into the

compartment labeled

Fabric Softener

and marked with this symbol: .

• DO NOT fill above the

MAX

fill line.

PODS

is a registered trademark of Procter & Gamble Company, Cincinnati OH, used under license by Electrolux.

• Use of a fabric softener-dispensing ball is

not recommended in front load washers.

CAUTION

Keep detergent packs away from children.

IMPORTANT

• When using the detergent

pack compartment, make

sure to select the

PODS

option before

starting the load.

• Once the

PODS

option has been

chosen, the washer will retain the

PODS

setting until manually changed.

• The washer will ALWAYS use a small

amount of HOT water to dissolve the pack

when the

PODS

option has been selected.

IMPORTANT

DO NOT mix liquids and powders.

IMPORTANT

Use of multi-product (detergent plus

softener) sheets or color-absorbing sheets

NOT recommended. They could disable

your machine and result in unwarranted

repair costs.

IMPORTANT

To prevent fabric damage, DO NOT overfill

the

Liquid Bleach

compartment or pour

bleach directly onto the load.



NOTE

From time to time you may see water in

the

dispenser

. This is part of the normal

operation of the washer.



NOTE

To prevent staining, DO NOT overfill

Fabric

Softener

compartment or pour liquid fabric

softener directly on wash load.

OPERATING INSTRUCTIONS

Содержание 400 SERIES





















































Результаты поиска

Содержание 400 SERIES

Отзывы:

Похожие инструкции для 400 SERIES

Бренды по названию

Популярные бренды

Electrolux 400 SERIES, Инструкция по использованию и уходу

Результаты поиска

Содержание 400 SERIES

Отзывы:

Похожие инструкции для 400 SERIES

Бренды по названию

Популярные бренды