Electrolux 400 SERIES Скачать руководство пользователя

Страница: 16 / 52

INSTALLATION

Removing door assembly

1. Completely open the door to expose

all four hinge screws.

2. Remove all four hinge screws with #2

square bit driver. Save for reinstalling later.

3. Hold the door with one hand

supporting the handle area and one

hand supporting the hinge. While

supporting the door at the hinge, press

firmly with the other hand until the

locating pins on the back of the hinge

plate dislocate from the front panel.

4. While supporting the door with one

hand, pinch the tabs to release the

plastic terminal cap from the hinge

plate.

5. Set the door face down on a flat

surface protected by soft cloth or

towel.

Fine Thread

Plastic knife

Screwdriver

with #2

square bit

Tools needed for

reversal:



NOTE

Door reversibility is available on all models.

IMPORTANT

BEFORE YOU REVERSE WASHER DOOR:

1. Be sure you have adequate swing area before reversing

door.

2. Gather your tools - including a screw driver with a #2

square bit and plastic knife (or small, flat prying tool that

won’t damage paint).

3. Protect flat work surface, such as top of washer or floor

near washer, with a soft cloth or towel.

4. Be sure washer is unplugged from power source!

WARNING

ELECTRICAL SHOCK HAZARD

Failure to disconnect power source before servicing could result in personal injury or

even death.

Reversing the door

IMPORTANT

Take care not to pull the door away from

the washer until you remove the wiring

harness terminal cap.

Содержание 400 SERIES





















































Результаты поиска

Содержание 400 SERIES

Отзывы:

Похожие инструкции для 400 SERIES

Бренды по названию

Популярные бренды

Electrolux 400 SERIES, Инструкция по использованию и уходу

Результаты поиска

Содержание 400 SERIES

Отзывы:

Похожие инструкции для 400 SERIES

Бренды по названию

Популярные бренды