Electrolux Professional N7E, Инструкция по установке и эксплуатации

Страница: 22 / 26

22
6
Cooling system failure Cooling fan blocked
Disconnect the appliance
from the mains and call
the after-sales service
Clean or replace the cool-
ing fan
7
Cooking zone tempera-
ture sensor
Inductor temperature
sensor disconnected or
interrupted
Disconnect the appliance
from the mains and call
the after-sales service
Check the inductor tem-
perature sensor if it works
replace induction
generator
8 None
— — —
9 None
— — —
10
Main board power circuit
failure
Phase relay faulty
Disconnect the appliance
from the mains and call
the after-sales service
Replace the induction
generator
11
Zone temperature sensor
out of range
Sensor is shorted or the
conditioning circuit is not
working properly
Disconnect the appliance
from the mains and call
the after-sales service
Check the inductor tem-
perature sensor if it works
replace induction
generator
12 None
— — —
13
Main board mains
voltage
Generator mains voltage
to low
Disconnect the appliance
from the mains and call
the after-sales service
Check the main power
supply
14 None
— — —
15
Main board microcontrol-
ler error
Induction generator
failure
Disconnect the appliance
from the mains and call
the after-sales service
Replace the induction
generator
H.4 Inefficiencies detected during cooking
INEFFICIENCY CAUSE CORRECTIVE ACTION
Insufficient heating of cooking zone
Material of pot unsuitable
Use a pot made from appropriate
material
A mains phase is lacking
Check the mains connections
Continuous heating of cooking zone at
max. power
Control interface faulty Check or replace the control interface
A free cooking zone starts working Pot detection sensor faulty Repair or replace the generator
Small metal objects are heated Pot detection sensor faulty Repair or replace the generator
No heating of cooking zone
Pot bottom less than 12 cm wide
Use a pot of suitable size
A phase is lacking
Check the mains connections
The appliance does not respond
Main fuse blown
Check the mains connections
Supply line faulty
The fuses blow when switching the
appliance on
Short circuit in generator Repair or replace the generator
Failed heating of a single cooking zone Generator faulty Repair or replace the generator
H.5 Repair and extraordinary maintenance
NOTE!
Repair and extraordinary maintenance have to be
carried out by specialised authorised personnel,
who can ask the manufacturer to supply a service
manual.
H.6 Maintenance intervals
All the components requiring maintenance are accessible from the front or the rear panel of the appliance.
The inspection and maintenance intervals depend on the actual machine operation conditions and ambient conditions (presence of
dust, damp, etc.), therefore precise time intervals cannot be given.
In any case, careful and periodical machine maintenance is advisable in order to minimise service interruptions.
To ensure constant machine efficiency, it is advisable to carry out the checks with the frequency given in the following table:
IMPORTANT
Machine maintenance, checking and overhaul operations must only be carried out by a specialised Technician or the
Customer Care Service, provided with adequate personal protection equipment (safety shoes and gloves), tools and
ancillary means;
Work on the electrical equipment must only be carried out by a specialised electrician or the Customer Care Service.