Electrolux Professional Lagoon WH6-6, Руководство по установке

Страница: 10 / 28

10
Installation manual
4 Setup
4.1 Unpacking
Remove the front panel by undoing the two screws on the bottom edge.
Remove the rear panel by undoing the screws.
Remove the three transport supports, one at the front and two at the back. Save the transport supports if the machine
needs to be moved in the future.
Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another
diagonally opposed to it, at the back of the machine.
fig.W00980B
Remove the machine from the pallet. The machine shall be lifted in the bottom frame.
Mount the enclosed supporting feet and level the machine.
fig.W00981
Remount the front- and the back panel.
Place the machine on its final position.