Electrolux Professional A7FTEDCSI0 Скачать руководство пользователя страница 9

Страница: 9 / 75

FRY TOP 700/900 EL/GAS

1.2 SAFETY INFORMATION/PRECAUTIONS

•

Risks mainly of a mechanical, thermal and electrical nature exist in the machine. Where possible the risks

have been neutralised:
–

directly, by means of adequate design solutions.

–

indirectly by using guards, protection and safety devices.

•

During maintenance several risks remain, as these could not be eliminated, and must be

neutralised by adopting specific measures and precautions.
•

Do not carry out any checking, cleaning, repair or maintenance operations

on moving

parts. Workers must be informed of this prohibition by means of clearly visible signs.
•

To guarantee machine efficiency and correct operation, periodical maintenance must be carried

out according to the instructions given in this manual.
•

Make sure to periodically check correct operation of all the safety devices and the insulation of

electrical cables, which must be replaced if damaged.
•

Extraordinary machine maintenance operations must only be carried out by specialized Technicians

provided with all the appropriate personal

protection equipment (safety shoes, gloves, glasses,

overalls, etc.), tools, utensils and ancillary means.
•

Never operate the machine, removing, modifying or tampering with the guards, protection or safety de-

vices.
•

Before carrying out any operation on the machine, always consult the manual which gives the correct

procedures and contains important information on safety.

Содержание A7FTEDCSI0












































































Результаты поиска

Содержание A7FTEDCSI0

Отзывы:

Бренды по названию

Популярные бренды

Electrolux Professional A7FTEDCSI0, Руководство по обслуживанию

Результаты поиска

Содержание A7FTEDCSI0

Отзывы:

Бренды по названию

Популярные бренды