EVF-1152S/66
Single 15” Two-Way
60° x 60° Full-Range
Loudspeaker System
General Description:
Technical Specifications:
Key Features:
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit
•
Pure Titanium Compression Driver
SMX2151 15” (381mm) LF Transducer with Fully
•
Symmetric Drive
Advanced 4
•
th
Order Crossover Network with HF
Protection
Coverage Pattern: 60° x 60° Constant
•
Directivity
TM
12” Rotatable Waveguide
101 dB Sensitivity, 134 dB Maximum SPL
•
System Rating: 500W Continuous, (2000W Peak)
•
Active Rating: LF400W/HF40W Continuous
•
(1600W/160W Peak)
(22) M10 Threaded Suspension Points
•
PI Version Available with Gland Nut and Stain-
•
less Steel Grille
The Electro-Voice® EVF-1152S/66 is a high power, 2-way loud-
speaker system that can be used in a variety of applications where
high quality sound reinforcement is required in a compact, light-
weight package.
The EVF-1152S/66 utilizes the ND2B, a high output 2” titanium
compression driver, coupled to a Constant Directivity™ 60° x 60°
waveguide. The SMX2151 15” woofer used FEA optimization for
motor, suspension, and electrical design for very low distortion,
high efficiency, and maximum intelligibility at high SPL levels. The
crossover uses steep 24 dB/octave slopes with equalization for
very smooth response in vocal range, linear off-axis response, and a
protection circuit for long term reliability.
The EVF-1152S/66 features make it ideal for many fixed install appli-
cations. The trapezoidal enclosure is constructed out of weather re-
sistant birch, and coated with EVCoat
TM
for maximum protection from
the elements. The unique acoustic and rigging design allows for
vertical and horizontal clusters to be built using any combination of
loudspeakers from the entire EVF & EVH Series, with 7 horn patterns
to choose from and an assortment of Low Frequency and subwoofer
loudspeakers, it gives you the tools to maximize flexibility of system
design, no matter what the application and budget. The innovative
input panel provides choice of phoenix style connector (included in
all standard models) or the ability to add; a dual NL4 type connector
cover plate or gland nut cover plate (for weatherizing applications).
An externally accessible jumper selects passive or active operation.
An available 70.7/100 Volt transformer kit simply mounts to the input
panel for use in distributed systems. All these features give you the
flexibility to do a large range of venues with fewer items in inventory
and quickly support your customer’s requirements.
Freq. Response
1
(-3 dB): 70 Hz - 14 kHz
Freq. Range
1
(-10 dB): 41 Hz - 18 kHz
Rec. Hipass Frequency: 45 Hz
Axial Sensitivity: 101 dB (1W/1m)
Max. Calculated SPL: 134 dB
Horizontal Coverage: 60°
Vertical Coverage: 60°
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: SMX2151, 15 in (381mm) Driver
HF Transducer: ND2B, 2 in (51mm) Diaphragm
Compression Driver
Crossover Frequency: 1450 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.0 Ohms
Connectors: (2) 4 Contact 10
AWG Phoenix/
EuroBlock Style
Screw Terminal
PI Version -
Gland Nut with
Included Input
Panel Cover
Enclosure Material: 13 Ply Weather Resistant Birch
Grille: 16 GA Galva-
nneal, Powder-
coat, with Rotat-
able Logo
PI Version -
Stainless Steel
with Hydropho-
bic Cloth
Suspension: (22) M10 Threaded Points
Dimensions (H x W x D): 30.26” x 18.50” x 18.37”
(768.6mm x 469.8mm x 466.6mm)
Net Weight: 70.9 lb (32.1 kg)
Shipping Weight: 81.2 lb (36.8 kg)
1
Half Space Measurement.
