background image

EVC Variable-Intensity Loudspeakers

Installation | en

9

Electro-Voice

Installation manual

2019-10 | 04 | F.01U.378.116

4.3

Working with mounting accessories

!

Warning!

Read and fully understand the manual and all safety instructions before attempting to
suspend this loudspeaker. Qualified professionals must carry out suspension and installation.
Follow all applicable local laws and regulations. Incorrect or improper suspension could
expose persons to serious injury or death. Carefully inspect loudspeakers and associated
hardware for defects or signs of damage before proceeding to suspend the speakers. Inspect
all components at least once per year or as local laws and regulations require. If any parts are
damaged or suspect, or if there is any doubt as to the proper functioning and safety of the
items, stop using them immediately. It is the responsibility of the person installing the
assembly to make sure the wall, ceiling, structure, and any attachments are capable of
supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker not
provided by Electro-Voice is the responsibility of others. Electro-Voice assumes no liability for
any damage or personal injury resulting from improper use, installation, or operation of the
product.

4.3.1

Mounting with a U-bracket

!

Caution!

It is the installer's responsibility to determine and use the proper mounting hardware for the
wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.

The EVC-1122-VI can be mounted on a wall or ceiling with an accessory U Bracket. The bracket
attaches to the sides of the loudspeaker in the same axis as the center of gravity to simplify
aiming and reduces the tendency to drift from the correct angle after installation.

Figure

 

4.1: EVC U-bracket installed vertically

EVC U-Bracket

EVC loudspeaker models

EVC-UB3 is an optional U-Bracket kit for
mounting a single EVC-1122-VI system to a
wall or ceiling.
Available in black or white:

EVC-UB3-BLK

EVC-UB3-WHT

The EVC-UB3 fits EVC-1122-VI models:
EVC-1122-VIB
EVC-1122-VIW
EVC-1122-VIBTEN54
EVC-1122-VIWTEN54

Tab.

 

4.1: 

EVC U-Bracket mounting models

For more information, see EVC-UB3 Adjustable U-Mount Mounting Bracket Installation
Instructions (F.01U.349.928).

Содержание EVC-1122-VIBTEN54



























Отзывы: