manualshive.com logo in svg

Electro-Voice EKX-12P, Руководство пользователя

Поделиться
Скачать
Electro-Voice EKX-12P Скачать руководство пользователя страница 15

Suspension

The EKX-12P and EKX-15P enclosures have eight (8) M10 threaded points; six (6) points on
top of the enclosure and two (2) points on the bottom. Forged shoulder eyebolts rated for
overhead suspension may be used to suspend an individual loudspeaker, such as the EBK-M10
accessory.

!

Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends all loudspeakers be suspended taking into
account all current national, federal, state, and local laws and regulations. It is the
responsibility of the installer to ensure all loudspeakers are safely installed in accordance
with all such requirements. When loudspeakers are suspended, Electro-Voice strongly
recommends the system be inspected at least once per year or as laws and regulations
require. If any sign of weakness or damage is detected, remedial action should be taken
immediately. The user is responsible for making sure the wall, ceiling, or structure is capable
of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibility of others.

 

Figure 5.1: Suspension points

 
Prior to use, inspect the suspension points and associated hardware for any cracks,
deformations, broken welds, corrosion, missing or damaged components which could reduce
the suspension points strength. Replace any damaged hardware. Never exceed the limitations
or maximum recommended load intended for the suspension points. As an added safety
measure, it is suggested the user install an extra suspension point back to the building
structural supports. This redundant safety point should have as little slack as possible (less
than one (1) inch is preferable). Prior to each use, inspect the loudspeaker enclosures for any
cracks, deformations, missing or damaged components, which could reduce enclosure
strength. Replace any loudspeaker systems damaged or missing hardware.

 

5

 

 

en

15

Electro-Voice

User Manual

2015.01 | 01 | F.01U.308.095

Содержание EKX-12P

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды