ElectrIQ iQLEAN-CR01, Руководство пользователя

Страница: 5 / 26

5
• Do not use in an environment where there is a risk of fire or explosion.
• Do not use to clean printer toner spilled on the floor as this could cause
a fire.
• Before using the robot cleaner, remove any fragile objects from the floor
e.g. glasses, bottles, candles, lamps. Also removes any sharp metals,
nails, sharp glass pieces or any other objects that could block or
damage the robot.
• Do not place any object on the top of the robotic cleaner.
• Do not leave any fragile objects on the side of tables, cabinets etc where
the robot could bump into and cause them to fall.
• Before operating the robot, ensure that there are no obstructions which
could cause the robot to become trapped or jammed.
UNIT SAFETY PROTECTION AND PERFORMANCE TIPS
• Make sure unit is assembled correctly before use.
• Charge for 6 hours before operating for the first time. If not using the
robot for a long time please fully charge and remove the battery.
• Always use the battery charger or base provided.
• Clean the robot and brushes regularly. Empty and vacuum the dust
container.
• If the robot becomes entangled, remove brushes, clean the debris and
reassemble.
BATTERY CARE
To get the most from the robot’s battery, please charge the product fully
and remove it from the robot before any expected long periods of
inactivity.
To prevent the battery from self-discharging please charge every three
months. If it reaches a level of deep discharge it may not be able to
charge. In this case please contact product support.