COMPONENTS
OWNERS MANUAL
V1.1 | 2021
Page | 15
Components
Thumb Throttle/PAS
Once you mount and before you begin riding your E-Bike, turn the main power
switch on. You will then default to PAS 1 (Pedal Assist 1) as seen in the display
settings section. This can be adjusted with the up and down arrows. In PAS 0, no
power will be delivered through the motor. In PAS 1-5, full throttle power is available
and the further you press the thumb throttle, the more power will be produced at
the rear wheel. Once you start to pedal, the motor will instantly increase to the PAS
speed selected (see chart below).
NOTE:
The values below are approximate and based on Assist Level ranges 1-5 this
can be modified up to 1-9 in Advanced settings -> Assist levels
PAS 1
PAS 2
PAS 3
PAS 4
PAS 5
11.6km
17.3km
22km
26km
32km
