Electra Light Big Bubble Machine, Руководство пользователя

Страница: 1 / 2

For adult use only. The bubble machine must be installed out of the reach of
children. Never leave the unit running unattended.
Never aim the output at open flames.
Extended use will make all surfaces slippery.
Position output of bubbles away from persons.
Switch off from mains when refilling the liquid or cleaning the system.
Regular cleaning of the bubble wheel is required.
Do not transport with liquid. If the machine get wet, do not use until it is completely
dry.
bubble liquid may leave permanent marks on clothing.
Big Bubble Machine
Thank you for choosing the Big Bubble Machine. You now own a rugged and powerful
state-of-the-art machine. Prior to use, we suggest that you carefully read all of the
instructions. By following the suggestions found in this user manual, you can look
forward to exceptional performance from your Big Bubble Machine for years to come.
Pay attention to all warning labels and instructions printed on the exterior of your
Big Bubble Machine.
Please follow these operation, safety and maintenance instructions to ensure a
long and safe life for yourBig Bubble Machine.
Unpacking & Inspection
ESPECIFICATIONS
Open the shipping carton and check that all equipment necessary to operate the
system has arrived intact. In addition to the Big Bubble Machine, you should receive th
following items:
Power: AC 120V/60Hz (120V Model)
AC 230V/50Hz (230V Model)
Fuse:
F2A/250V (120V Model)
T1A/250V (230V Model)
Dimensions (cm): 50*40*48 cm
1.
2.
3. This user manual.
Power cord and plug.
A hanging bracket.
Before beginning initial setup of your Big Bubble Machine, make sure that there
is no evident damage caused by transportation.
In the event that the unit’s housing or cable is damaged, do not plug it in and do
not attempt to use it until after contacting your dealer for assistance.
CAUTIONS
Setup
Pay attention to all warning labels and instructions printed on the exterior of your
Big Bubble Machine
Remove all packing materials from the bubble machine.
Place bubble machine on a flat surface, or . Do not overfill your bubble machine. Overfilling will cause the unit to leak.
Danger of electric shock
Keep this device dry.
Keep the bubble machine upright.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to use
take care to determine that the unit is installed at the rated voltage.
Turn off or unplug when not in use.
This machine is not water-proof or splash-proof. If moisture, water, or any liquid
gets inside the housing, immediately unplug the unit and contact a service
technician or your dealer before using it again.
No user serviceable parts inside. Refer to your dealer or other qualified service
personnel.
For indoor use only. Not designed for outdoor use.
OPERATION
Turn on the power switch located on the back of the bubble machine. You will notice
that the internal bubble drum and fan are activated. Bubbles are now produced.
Save these instructions
This appliance must be earthed.