This kitchen high-speed blender uses high-speed motor to provide power for
rotating stainless steel blade assembly to achieve the purpose of chopping
ingredients. Featuring refined motor with adjustable rotating speed as well as
unique blade and PC jar structure, it can achieve a variety of blending effect.
Product Introduction
Product Illustration
Bearing imported from Japan, the rotating speed of this motor reaches
up to 30000r/min with little noise. With fan cooling device, the blender
can run for a long time to meet the commercial premises requirements.
Motor has designed with overheat protection device to prevent burning.
The machine is equipped with circuit system to control the rotating speed,
stabilize current, protect the motor and reduce external interference.
The machine is equipped with over-current protector which can protect
the device when current or voltage fluctuates.
The machine has a speed tuning switch and momentary switch, hence
can provide a variety of mixing effects.
The rotating connector of the machine is a pair of upper and lower
stainless steel parts, so it will not be damaged.
The waterproof glue on the bearing is made of special wear resistant
material which is hard to wear for a long time.
The specially processed blade assembly is hard enough to chop or grind
herbs, beans and other ingredients.
Its PC jar is made of imported PC material and undergone high temperature
processing, wear resistant and crash resistant.
If the power cord is damaged, it can only be replaced or repaired by
manufacturer's service department staff or equivalent personnel in order
to avoid danger.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Stir Bar
Speed Tuning Knob
Power Switch
Motor
Refill Cover
Jar Lid
Tritan Jar
Blade Assembly
Securing Plate
Instantaneous
Rotation Switch
Body Cover
Stand Base
