- 6 -
www.elechico.com
13)
The measuring probe is the high-quality precision part and must be
carefully protected. Do not touch or press the probe with fingers or
other objects. Use an alcohol swab or cotton swab moistened with 95%
to clean the measuring probe.
14)
lease do not charge non-rechargeable batteries and put them into the
fire.
15)
Please remove the batteries if the thermometer will not be used for a
long time.
16)
Waste electrical materials should be sent to a dedicated collection
point for recycling and disposal follow the local laws and regulations as
direct disposal in the garbage can is harmful to the environment.
17)
Do not throw the thermometer directly into the dustbin. Instead,
dispose of it follow the local laws and regulations or contact the
manufacturer for recycling.
11.
Important note
1)
Remove the hair and sweat from your forehead area before taking the
measurement.
2)
Please select the appropriate temperature when taking a temperature.
3)
Use of this thermometer is not intended as a substitute for
consultation with your physician or pediatrician.
4)
If damaged, do not attempt to repair the instrument! Please contact
dealer.
5)
Medical electronic products require special precautions according to
the EMC regulations.
6)
The thermometer is suitable for all ages.
12.
Advice before first use
In order to obtain accurate, stable and reliable measurement data, please
check according to the following steps before using the thermometer.
First step: Use a traditional thermometer to measure someone. Suppose
the measured temperature is 36.5
℃
.
The second step: Use our thermometer to measure the temperature of the
same person. Keep the thermometer probe about 3-5cm away from the
forehead when taking a measurement (Please remove any obstacles that
may affect the measurement, such as hair, sweat, etc.). If the reading is also
36.5
℃
, it indicates that the thermometer can be used in normal Settings.
If you get a lower reading, such as 35.5
℃
, you need to do temperature
calibration. Press “+” & “—” button for 3 seconds after the backlight off till
