INTENDED USE OF THE ELECTRIC BURR GRINDER
The burr grinder MK150 is intended for grinding coffee beans. The stainless
steel grinding mechanism allows the user to adjust the fineness of the grind.
You can enjoy aromatic coffee grind suitable both for espresso machines
and as Turkish coffee.
USE
Before using the machine for the first time, please carefully read this manual.
After unboxing the device, make sure it has not been damaged while transported. If in doubt, please refrain
from using the device until you consult the service centre.
- Wash the containers (2) and (6) and the covers (1) and (7) (see: CLEANING AND MAINTENANCE);
- Put the device on a flat and stable surface;
- Mount the container (2) onto the housing (5) and turn it clockwise until a click sound is heard;
- Open the intake hole (9) on the cover (7) by turning the knob (8) clockwise;
- Mount the cover (7) onto the container (6) and insert it into the housing (5);
- Adjust the desired fineness of your grind by twisting the container (2). The scale (3) shows grind fineness
grades:
COARSE,
MIDDLE
FINE
Twist the container until the desired grade corresponds to the index on the housing (5);
- Grind fineness should be always adjusted before you put coffee beans in the device;
- Put coffee beans in the container. The amount of coffee beans must not exceed the MAX index;
- Mount the cover (1);
- Plug the device to the grid with parameters as mentioned in this manual;
- Press the ON/OFF button (4) to grind the beans. Do not use the device for more than 60 seconds to prevent
its engine from overheating. Wait at least 1 minute before using the device again. The total operation time
must not exceed 2 cycles, each lasting 60s. Following the two cycles, let the engine cool off for a long enough
period, i.e. about 10 minutes;
- After the coffee has been ground, wait until the abrasive surfaces come to a halt and then remove the
container (6) and open the cover (7).
The device is fitted with two safety features preventing the device from starting if the containers (2) and (6)
are not mounted properly.
Please adhere to the continuous working time of the device. Exceeding the working time or the lack of
required working pauses might irreversibly damage the engine.
A thermal safety feature will be activated in the case the engine starts to overheat and the grinder will turn off
automatically. In that case, you can turn on the device only after the engine has cooled off.
Do not put your fingers or any objects in the container (2).
GENERAL DESCRIPTION
1. Cover of the coffee beans container
2. Coffee beans container
3. Grind scale
4. ON/OFF button
5. Housing
6. Ground coffee container
7. Cover of the ground coffee container
8. Knob
9. Intake hole
TECHNICAL SPECIFICATION
- Power: 100 W
- Volume: 90g
- Total working time: 2 cycles, 60 s each,
with a 60 s pause before starting the second cycle.
OPERATING INSTRUCTION
ELECTRICAL BURR GRINDER MK150
1
2
3
4
5
6
7
8
9
4
