eldoLED TOOLbox pro Скачать руководство пользователя страница 1

© 

2016 eldoLED. All rights reserved. V1.6

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.

 Quick Start Guide TOOLbox pro and FluxTool v2.0.93

(TLU20504)

Working with the TOOLbox pro and FluxTool application

Flexibility is one of eldoLED drivers’ key benefits.  Use the TOOLbox pro and the FluxTool application to perfectly match your driver to your appli-
cation. This quick start guide shows you how to go about it.

1. What you need 

• 32/64-bit Microsoft Windows Vista, 7 or 8; or Mac OS X 

10.9 or 10.10

• TOOLbox pro (TLU20504). Cables are included.
• FluxTool v2.0.93 application: download at your driver 

product page or the TOOLbox pro product page.

2. Installing the FluxTool application

1. Windows: run the FluxTool setup. After the installation, 

make sure to also install the TOOLbox driver.

2. Mac OS: drag the FluxTool icon into your 

Applications folder.

 

  

Caution: TOOLbox pro has not been designed for 
direct connection to a mains outlet. 

3. Connecting the TOOLbox pro

  

 

  

In order for the FluxTool application to detect the LED driver, the driver 
must be powered on. Never connect more than one driver at a time.

DMX in +

no DALI power

DALI power

DALI activity

LEDcode not connected, no LEDcode/DMX activity

LEDcode connected, no LEDcode/DMX activity

LEDcode or DMX activity

TOOLbox pro connection error to computer

off

50%

100%

off

50%

100%

Blinking

DMX in -

DA +
DA -

L
LEDcode -

Not used

DMX in shield

DALI

LEDcode

DMX/

LedSync

4a. Configuration and control via DMX menu   

    DMX menu

When starting the FluxTool software, a Welcome screen is shown first. 
In this screen you can see if the TOOLbox pro is correctly connected 
to your LED driver and computer, and your driver is identified.

Parameter configuration

You can finetune your driver with the DMX parameters:
1. Open the Setup tab to download your driver’s current settings to 

your FluxTool screen.

2. Make any required changes in the appropriate fields and click the  

“Write” button at the bottom to save the changes to the driver. 

 

For a full description of all available DMX parameters, refer to Adden-
dum sheet DMX/LedSync parameters.

Sliders

The FluxTool application features one Broadcast slider and 512 DMX 
address sliders to test the settings on your luminaire. 

  

Only make changes you are sure of. Some parameters can 
cause damage to LEDs when set to an incorrect value. 

Отзывы: