Elcon Elconnect next EAD 100w, Краткое руководство по эксплуатации

Страница: 21 / 36

EAD 100w
Version: 2013/04/03
19

WEB interface for user-specific settings
Figure 2: Block diagram
2 Installation
2.1 Hardware requirements / Minimum system requirements for installation of the
EAD 100w

Power socket providing nominal voltage range 100 V … 240 V

/ 50 Hz … 60 Hz

Ethernet-WAN from operational Access Switch

Laptop or PC running on OS Windows
®
98 SE, ME, 2000, XP; MAC; Linux and
full-duplex network interface card (interface: 10/100Base-T); CPU: Pentium II
®
,
500 MHz or higher

Diverse tools (water-level, pencil, drilling machine, drill Ø 6 mm, screwdriver)
2.2 Scope of delivery

1 EAD 100w

1 plug-in power supply unit 12 V

, 1.2 A

1 drilling template

1 toolkit bag (2 dowels, 2 screws)

1 short operating manual
2.3 Selecting the place of installation / Fixing the device
The EAD 100w has been designed for in-house use in closed rooms as wall-mount unit. The
EAD 100w should be placed nearby the Ethernet-WAN cable running from the Access
Switch and next to a mains socket. Since the EAD 100w is determined for continuous opera-
WLAN
802.11 b/g
WLAN
Access Point
Ethernet
LAN
2 × POTS
WAN
Ethernet
Router
or
Bridge
2 × POTS
VoIP