Elcon Elconnect Fiber FOS 100w, Краткое руководство по эксплуатации

Страница: 22 / 28

FOS 100w
Version: 2010/08/13
20
3 Technical data
Optical interface (optical receiver and transmitter for voice and data)
Optical fiber link 1 × SC/PC
Ethernet-WAN 100Base-BX /-LX /-FX
Fiber type Single-mode Fiber; TX: 1310 nm, RX: 1550 nm
LAN interface (Ethernet Router)
Ethernet LAN 4 × RJ45; Auto MDI / MDIX; Transparent Bridging mode
DHCP static and dynamic IP address assignment
WLAN interface
Access Point acc. to IEEE802.11b/g
802.11g Data rate 54, 48, 36, 24, 12, 9, 9 Mbps
802.11b Data rate 11, 5.5, 2, 1 Mbps
Safety 64- / 128-bit WEB; WPA-PSK, WPA2-PSK, WPA, WPA2
Telephone services (analogue telephone interfaces)
Telephone sockets 2 × RJ11
Signalling SIP
Voice Codecs G.711
Supplementary services 3PTY; CLIP; CLIR; HOLD; CW etc.
Service quality & Security
Quality of service Diffserv; Type of Service, Class of Service
Firewall Network Address Translation (NAT); Port Forwarding
Management
Remote Management SNMP-Management; Dynamic configuration via TFTP
Firmware Update Remote and local Firmware Update
Powering through plug-in power supply module
Primary voltage (AC)
Operating voltage range 230 V ± 15%
Frequency range 50 Hz … 60 Hz
Current consumption < 150 mA
Secondary voltage (DC)
Nominal voltage 12 V
Current consumption < 1.2 A
Casing
Design version Plastic casing with integrated display elements and physical
interfaces
Display elements 5 LEDs for status information
Dimensions 240.4 mm
×
160.4 mm
×
48.2 mm (W
×
D
×
H; without PI box)
Colour signal white (RAL 9003) , jet black (RAL 9005)
Weight ca. 0.5 kg