I02-243 User & maintenance manual
Version 03
(translation of the original manual)
of
TLM1500 ITS 24 V
Page
4
of
37
3
COMMISIONNING
3.1
Receipt of equipment
When receiving the material, check that the packaging has not been damaged and that the
equipment is in perfect condition.
3.2
Stopper
1.
Place the stopper right in the middle of the two profiles of the system.
2.
Put the workpiece carrier in contact of the stopper.
3.
Adjust the presence detection range :
-
Move the 2 claws to align the sensor with the cam of the workpiece carrier (the sensor
must pass 1)
-
When the sensor returns to 0, the stop back into the groove of the workpiece carrier.
Sensor
Claw
Cam
Work piece carrier
against the stopper
Sensor
Stopper
