I02-243 User & maintenance manual
Version 03
(translation of the original manual)
of
TLM1500 ITS 24 V
Page
1
of
37
1
GENERAL INFORMATION
1.1
Important notice
The following instructions are used as technical documentation for the manufacturer of the final
machine system.
elcom
company is the provider of the subset transfer system
TLM 1500 ITS 24V
.
The manufacturer of the final machine system must ensure that all safety equipment is provided and
functional, that regular checks are made, that any danger arising from moving parts is controlled or
reported (pinch, shear) and that the documentation is complete.
1.2
Applicable standards
The machine system where the subset is incorporated cannot be in service until all the terms and
conditions established by directive 2006/42/CE have not been applied.
According to the European Directive 2006/42/CE,
elcom
transfer systems are considered as almost
full machine system.
They are therefore not subject to an EC declaration of conformity but are the
subject of a declaration of incorporation. The latter is transmitted at the time of delivery,
accompanied by the exploded view of the motorized equipment.
However, the following standards are considered for the design of
elcom
transfers:
×
2006/42/CE directive related to machine systems
×
73/23/CE directive related to electrical equipment
Elcom
company provides monitoring and quality recognized by the ISO 9001 certification.
Regarding the environment respect,
elcom
company is also ISO 14001 certified.
1.3
Applications
The linear transfer elements
TLM1500 ITS24V
are provided for moving and positioning workpiece
carriers depending on each configuration for the end customer.
They are intended to be incorporated in all the line of the user.
1.4
Terms of use
The elements of the
TLM 1500 ITS24V
transfer system is provided for a normal use in industrial
workshop, type assembly or equivalent, in a dry environment.
They are not suitable for the transport of materials such as sand, granules or grains.
The maximum load applicable to the transfer system is specified in the catalog and must always be
strictly followed.
To ensure a proper operation of the transfer and an optimal lifetime, using shall be focused on the
followings :
×
Operating temperatures between 0° and 40° C,
×
Avoid dusty or smoky atmospheres,
×
Avoid accumulation of sharp edged objects on conveyor,
×
Avoid positioning of the machine under direct exposure to UV rays.
